Follow

IED5416CS Special Button Combinations

 The following button functions are implemented in the 5416 by pressing and
          holding groups of buttons (some features new w/ ver 1.0.7):

Reset Dynamic DHCP

   ON power up - press and hold the bottom left and right corner buttons.
   Keep buttons pressed until the corresponding buttons illuminate for 1
   second then shuts off. The unit will be reset to DHCP mode and will no
   longer have a static IP address.

   Button Pattern:

   0 0 0 0
   0 0 0 0
   0 0 0 0
   X 0 0 X

Set (temporary) Static IP address

   On power up - press and hold the upper left and right corner buttons.
   Hold buttons until the corresponding buttons illuminate for 1 second
   then shuts off. The unit will take on an aliased static IP address of
   192.168.1.150.

   Button Pattern:

   X 0 0 X
   0 0 0 0
   0 0 0 0
   0 0 0 0

Lamp Test

   To test the button lamps and indicators, press the four outer corner
   buttons:

   Button Pattern:

   X 0 0 X
   0 0 0 0
   0 0 0 0
   X 0 0 X

Alert Silence

   When an alert is sounding - depress the four inner buttons to silence
   the alert.

   Button Pattern:

   0 0 0 0
   0 X X 0
   0 X X 0
   0 0 0 0

 

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

Powered by Zendesk